How to Use and Access CZONE Touch Display and Contact 6 Plus Module
CZONE DIGITAL SWITCHING SYSTEM The CZONE
Digital Switching System is a cutting-edge electrical control system designed to enhance the functionality and convenience of off-road models. It enables the user to control various electrical components in the caravan through a centralized touch display and modules.
CZONE TOUCH DISPLAY
The CZONE Touch Display is located on the side of the overhead cupboard at the entrance door. It allows the user to monitor and control the caravan's electrical components, such as lighting, water pumps, and air conditioning, through a simple and user-friendly interface. The display shows the current status of each component and allows the user to turn them on or off with a single touch.
CZONE CONTACT 6 PLUS MODULE
The CZONE Contact 6 Plus Module is a compact device that controls up to six circuits in the caravan. There are four locations where the module can be found: overhead cupboard on the driver's side, overhead cupboard on the passenger's side, behind the access panel inside the driver's side wardrobe, and under the oven behind the access panel.
CZONE CONTACT 6 PLUS MANUAL FUSE BYPASS
In case of a fuse failure, the CZONE Contact 6 Plus Module has a manual fuse bypass function. To use this function, remove the fuse from the lower normal position and place it into the upper bypass position. This will temporarily bypass the failed circuit and allow the user to continue using the other circuits until the fuse is replaced.
NOTE: Please refer to the product operation manual for further information on the CZONE Digital Switching System and its components. It is important to follow the instructions carefully and consult with a qualified technician for any technical issues or concerns.
Disclaimer: The information provided in this article is specific to the previous Zone RV model and may not apply to other RV models. Please refer to the product manual for further information or consult with a qualified technician.