How to Couple and Uncouple Your Off-Road Trailer with Mchitch

A Step-by-Step Guide to Coupling and Uncoupling

Coupling

1. Only couple on level ground to ensure a safe and secure connection between the trailer and tow vehicle.

2. Ensure that the tapered shaft on the coupling is the same height as the receiver. Once you establish this, mark the height on your jack leg. This will allow for quick and easy hitching up in the future, especially when using a reversing camera.

3. When using a reverse camera, place the yellow magnetic marker on top of the universal to make the coupling position more visible during the coupling process.

4. Slowly reverse the tow vehicle until the tapered shaft enters the receiver and engages the latch handle.

5. After the coupling is complete, fit the hitch pin through the receiver body and secure it with the "R-clip" to prevent any accidental uncoupling during towing.

6. The lock body supplied with the McHitch coupling can now be fitted to the hitch pin for added security.

7. Release the handbrake and confirm that the trailer is securely attached to the tow vehicle before proceeding with towing.

Uncoupling

1. Only uncouple on level ground to ensure safety and stability during the process.

2. If the surface is uneven, leave the safety chains attached until the last step.

3. Lower the jack leg to the marked position to ensure that the trailer remains level during uncoupling.

4. Engage the handbrake and chock the wheels if required to prevent the trailer from rolling.

5. Remove the tow plug, brake-safe lanyard, camera lead, and safety chains.

6. Remove the lock body and then remove the "R-clip" before removing the hitch pin.

7. Raise the latch handle and slowly drive forward until the tapered shaft is clear of the receiver.

By following these simple steps, you can ensure a safe and secure coupling and uncoupling process for your off-road trailer equipped with a McHitch coupling system. Remember to always follow the manufacturer's instructions and consult a professional if you have any concerns or questions about the process.