Plumbing
      Back to home
      1. Knowledge Base
      2. Service
      3. Plumbing

      How to Operate the Creek Pull System and Water Connection Manifold in Your Caravan (Off Road Models)

      A Guide to Filling and Bypassing Water Tanks

      The creek pull system and water connection manifold are important components of your caravan's plumbing system. In this article, we will cover the operation of the creek pull system, filling and bypassing water tanks, and the location of the water connection manifold.

      Creek Pull System Operation

      The plumbing valves for the creek pull system are located either behind the inspection panel next to the toilet or under the center seat in a rear lounge model. To fill your water tanks using the creek pull system, follow these steps:

      1. Ensure all TANK VALVES are in the CLOSED position.
      2. Ensure WASHING M/C VALVE is in the CLOSED position.
      3. Ensure CREEK IN & CREEK OUT are in the OPEN position.
      4. Connect a hose from the water source to CI (Creek In) hose fitting.
      5. Connect a short hose from CREEK OUT to the tank you wish to fill.
      6. On the CZONE touchpad, switch the "WATER PUMP" to ON.
        Screen Shot 2023-03-08 at 3.04.49 pm

      To bypass water tanks, follow these steps:

      1. Ensure all TANK VALVES are in the CLOSED position.
      2. Ensure WASHING M/C VALVE is in the CLOSED position.
      3. Ensure CREEK IN is in the OPEN position.
      4. Ensure CREEK OUT is in the CLOSED position.
      5. Connect a hose from the water source to CI (Creek In) hose fitting.
      6. On the CZONE touchpad, switch the "WATER PUMP" to ON.

      Screen Shot 2023-03-08 at 3.05.00 pm

      Water Connection Manifold

      The water connection manifold in your caravan is located on the driver's side behind the rear wheel. This is where you will find the inlet for filling your water tanks, as well as the bungs for draining them.

      Screen Shot 2023-03-08 at 2.59.58 pm

      Filling Water Tanks

      To fill your water tanks, follow these steps:

      1. Ensure all TANK VALVES are in the CLOSED position.
      2. Ensure WASHING M/C VALVE is in the CLOSED position.
      3. Connect a hose from the water source to the inlet on the water connection manifold.
      4. On the CZONE touchpad, switch the "WATER PUMP" to ON.

      Understanding how to operate the creek pull system and water connection manifold in your caravan is crucial for a safe and comfortable trip. Following the steps provided in this article will help you fill and bypass your water tanks with ease. If you have any questions or concerns about your caravan's creek pull system or water connection manifold, please refer to the user manual or contact Zone RV for assistance.